Child pages
  • Defining a Data Model

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Stoc

Data Providers

Servoy's "'Data Providers" ' are the atomic units of the data binding layer. A Data Provider holds an individual data value which may be bound to both User Interface elements, as well as back-end resources. Thus, Data Providers are the link between the user experience and the raw data. 

Types of Data Providers

There are several types of Data Providers, each with different data bindings and uses:

...

Once established, a data provider can be bound to user interface elements at design-time. At run-time, the elements come alive with data which is contextual to the application state and the Data Provider's back-end bindings. The most obvious example is a text field which is bound to a column in the database table. However, any of the types of Data Providers can be bound to any UI components, including fields, labels, buttons, tooltips, etc.

Columns

Database Columns are the most common type of Data Provider in Servoy. When a named server connection is established, the entire database structure - all tables and their columns - is read. Columns become available vehicles for data binding. Additional metadata properties are used to further describe how each column is treated in the application.

These properties include:

Column Name

This is the name that is returned by the JDBC Driver. The name will always be displayed as lower case. The column name is also used as the Data Provider ID when working with foundsets and records.

Data Type

While relation databases support many different data types, Servoy will generalize the data type of a column into one of five general types. In this way, Servoy can support a wide range of database vendors. The five generalized data types include the following:

  1. Text: Any alpha-numeric characters (i.e. char, varchar, memo, CLOB, etc.)
  2. Integer: Whole numbers (i.e. bit, short, long, bigint, etc.)
  3. Number: Decimal numbers (i.e. float, double, etc)
  4. Datetime: Temporal values (i.e. date, datetime, timestamp, etc.)
  5. Media: Binary data (i.e. BLOB)
Column Length

For certain data types, databases must enforce the amount of storage allocated to single column for a single record. Data types which accommodate variable length entries, such as text, decimal numbers and binary data will have a length property. Servoy will infer and display this property in the column definition.

Row Identifiers

Servoy is designed to work with regular database tables as well as SQL Views. Regular database tables will have a primary key, consisting of one or more columns, who's value uniquely identifies a record in the table. Servoy will infer the primary key from the database table. However, in the case of SQL Views, which don't have a built-in primary key, the developer must specify which column(s) can be considered the unique row identifier.

Null Values Allowed

Relational database tables may enforce non-null constraints on certain columns, typically for primary key and other essential columns. Servoy will infer from any such constraints from database table and reflect

Column Meta Data

Column definitions include several metadata properties, which store information that is used both in development and at runtime.

Title

The Title property of a column is simply the human-readable name for a column. When a field is placed on a form with the Place with labels option, the label's text property will be initialized to the title property for the column to reach the field is bound. For multilingual applications, it is ideal to populate a column's title property with an i18n message key, thus allowing field labels to default to message key, which is translated at runtime.

Default Format

The Default Format property of a column will enforce the formatting that is used when the column is bound to a field element. The field element's format property will assume the default format of the column unless it is overridden in the element.

Foreign Type

This is a simple metadata property to indicate that a column is a foreign key to another table in the same database. One can set the Foreign Type property to the target table. This provides metadata so developers will know that a column is used as a foreign key. Servoy will use this information when new relations are created between the tables and auto-fill the keys. This property is also used by the mergeRecords method of the databaseManager API to update any affected related records, such that they'll reference a new key. 

Exclude Flag

Enabling a column's Excluded Flag will completely exclude a column from the Servoy runtime environment. This means that Servoy will exclude this column for every query that it issues. This option is ideal to enforce that certain columns are never available in a Servoy application.

UUID Flag

Servoy supports the use of Universally Unique Identifiers (UUID). A UUID is a 16-byte number which can be (practically) guaranteed to be unique across computing environments, making it ideal to use for sequences in scenarios where traditional numeric sequences are not adequate, for example when syncing data which is generated offline. It is generally not feasible to store UUIDs as numeric data types because the number is so large. Rather UUIDs are most easily stored as 36-character strings. When using a text column to store UUIDs, one should mark the column's UUID flag. Thus, Servoy will provide programmatic access to this column in the form of a built-in UUID data type, which allows both string and byte representation.

Description

A column's description property is a simple container for additional metadata, such as programmer notes about the column's purpose, etc.

Auto-Enter Definitions

Servoy provides several ways in which a column may be automatically populated when a record is created. Some of the auto-enter options are also applicable when an existing record is updated. 

System Values

...

Database-Managed

...

Indicates that the value is deferred to the database at the time of insert. The value is populated and controlled by the database and it will not be overwritten from Servoy.

...

Creation User UID

...

The UID parameter that was supplied at the time of login, entered at the time of record creation.

...

Modification User UID

...

The UID parameter that was supplied at the time of [login|https://wiki.servoy.com:8443/display/DOCS/Security#Security-login|Link to login method in reference guide], reentered each time the record is modified.

...

Creation Datetime

...

The current date and time on the client, entered at the time of record creation.

...

Creation Server Datetime

...

The current date and time on the application server, entered at the time of record creation.

...

Modification Datetime

...

The current date and time on the client, reentered each time the record is modified.

...

Modification Server Datetime

...

The current date and time on the application server, reentered each time the record is modified.

Custom Value

A custom value is simply a literal value (i.e. 'Blue', 1.5) which may be used as a default. This option is only available for Integer, Number and Text data types.

Database Default

This indicates that the value is deferred to the database at the time of insert. However, unlike Database-Managed system values, this value can be modified from Servoy after the record is inserted.

Lookup Value

Lookup Values provide the option to auto-enter a value that is contextual to the record being inserted. Options include any of the record's data providers, any data providers from foundsets related to the record, as well as an global relations or variables.

Sequence

Sequences may be used to auto-increment a column's value. This is ideal for populating primary key columns, which must be unique.

...

Servoy Sequence

...

This is a sequence which is defined in the application tier and managed by Servoy. The sequence will generate integer values using a given next value and step value.

Panel
borderColorgreen
borderStylesolid

i.e a step value of 1 will yield sequential values of 1,2,3,4...

A step value of 2 will yield 1,3,5,7...

In deployment, Servoy Sequences are stored in the repository database and there are options to recalculate the sequence's next value from existing data.

...

Database Sequence

...

Servoy will call a named sequence in the database to populate the value. The column will be populated and available prior to inserting the record

...

Database Identity

...

The sequential values are managed and populated by the database. The column is not populated until after the record is inserted

...

UUID Generation

...

Servoy will automatically populate a text column with a textual representation of a UUID. Be sure that the column's UUID Flag is also enabled.

Calculations

A Calculation is very much like a database column, except that its value, rather than being stored, is dynamically computed each time it is requested. This is achieved by creating a JavaScript function which is bound to a database table. The function takes no arguments and returns a value, which like a real database column, is declared to be one of the five general data types. The scope of the JavaScript function is an individual record object. Therefore any of the record's other data providers, and related foundsets are immediately available, as well as global variables and globally related foundsets.

A calculation is declared at the solution level, and is available throughout the solution in which it is declared, as well as any modules containing it. To support this, there is one JavaScript file per table, per solution, which holds calculation functions. For example, the database tables 'orders' may have a corresponding file 'orders_calculations.js' in any solution. And this file could contain many individual calculation functions.

Just like real database columns, calculations may be placed as fields on forms, used in data labels, and requested programmatically.

Note

Performance

Calculations may be called often. Therefore, developers should use discretion when implementing their JavaScript function. Most in-memory operations are very fast. However, actions which result in SQL queries or file operations may be slower and less predictable. For example, a calculation may be shown in a scrolling table-view form, in which case it may be called hundreds of times. 

Aggregations

An aggregation is a data provider which represents a database column that is aggregated over a set of records. At design-time aggregations have the following properties:

  • Name - The name by which the aggregation will be available as a data provider throughout the solution in which it is declared, as well as any modules containing it.
  • Type - There are five types of aggregations:
    • Count - The number of records in an entire foundset containing a non-null value for a column
    • Sum - The sum of all the values for numeric column in an entire foundset
    • Minimum - The smallest value for a numeric column in an entire foundset
    • Maximum - The largest value for a numeric column in an entire foundset
    • Average - The average value for a numeric column in an entire foundset
  • Column - The column containing values that are aggregated

At runtime, aggregations are computed in the context of a foundset. The value is derived from a SQL query, which takes the form of a SQL Aggregate Function and appends the WHERE clause used by the foundset's query.

Variables

Variables are Data Providers which, unlike columns, calculations aggregations do not bind to any persistent, back-end data source. Instead, variables store data in-memory for the duration of the client session only. However, variables may bind to UI components the same as any other data provider.

Data Types

While variables can actually contain any JavaScript object or literal value, they must initially belong to one of the following data types:

  • Text
  • Integer
  • Numeric
  • Data/Time
  • Media
Note

Notice that these are the same as the generalized data types for column-based Data Providers. 

Scope

Variables can belong to one of two scopes:

  • Global
  • Form

Other than programming scope, the only difference between the two is that globals can be used as keys in relations.

Relations

Relations, at design-time model associations between two tables by joining on key data providers. At runtime, a relation becomes a context-sensitive programming reference to related data. Thus, relations are simple, but powerful mechanisms to display, edit and search for data from any context. They can be used, not only to model simple database relations, but also to create sophisticated filters and searches.

Design-Time Properties of Relations

Relations have several design-time properties that dictate how related foundsets will behave at runtime.

...

Source Table 

...

Can be any database table or view from any named server connection.

At runtime, a related foundset will exist in the context of a single record from the source table. For example, the relation customer_to_orders, will become available in the context of any record in a foundset which is based on the customers table.

...

Destination Table

...

Can be any database table or view from any named server connection and is not limited to the same database as the destination table.

At runtime, a related foundset will contain records from the destination table

Note

The destination table can exist in a separate database from the source table. This is a powerful feature, but it is worth noting that a related foundset, who's relation is defined across two databases will not be available when the source foundset is in find mode. This is because a related find requires a SQL JOIN, which cannot be issued across databases for all vendors.

...

Relation Items

...

The nature of the relation between the source and destination tables is defined by one or more Relation Items. Relation Items are expressions, each consisting of a pair of key data providers (one from each table) and a single operator.

Source Data Provider

Operator

Destination Data Provider

The Relation Items will be used to constrain the records that are loaded in the related foundset, such that records are loaded only when all of the expressions evaluate to be true.

Example: This example creates a relation between the customers and the orders table. A related foundset will only load orders records with a customerid equal to the customerid in the context of the source customer record.

Source (customers table)

Operator

Destination (orders table)

customerid

=

customerid

...

Data Providers

...

One data provider from each table will serve as an operand in the key-pair expression. Therefore, both data providers must share the same data type. Columns, calculations and global variables may all be used as the source data provider. However, only columns may be used for the destination data provider.

Source Data Provider - Available Types

  • Columns
  • Calculations
  • Global Variables

Destination Data Provider - Available Types

  • Columns Only
Note

Related foundsets are loaded in the context of a single source table record, which is already known. Therefore, any global variables, as well as the source record's calculations can be evaluated and used as a key. However, only columns from the destination table can be used as the dynamic data providers cannot be evaluated on behalf of destination records before they are loaded.

...

Operators

...

Each key pair expression is evaluated using a single operator. Certain operators are only applicable to certain data types. Below is a list of all available operators and the data types for which they are applicable.

Operator

Description

Data Types

=

Equals

Text, Integer, Number, Datetime

>

Greater Than

Text, Integer, Number, Datetime

<

Less Than

Text, Integer, Number, Datetime

>=

Greater Than or Equal To

Text, Integer, Number, Datetime

<=

Less Than or Equal To

Text, Integer, Number, Datetime

!=

NOT Equal To

Text, Integer, Number, Datetime

like

SQL Like use with '%' wildcards

Text

not like

SQL Not Like use with '%' wildcards

Text

#=

Case-Insensitive Equals

Text

#!=

Case-Insensitive NOT Equal To

Text

#like

Case-Insensitive SQL Like

Text

#not like

Case-Insensitive SQL NOT Like

Text

^||=

Null OR Equals

Text, Integer, Number, Datetime

^||>

Null OR Greater Than

Text, Integer, Number, Datetime

^||<

Null OR Less Than

Text, Integer, Number, Datetime

^||>=

Null OR Greater Than or Equal To

Text, Integer, Number, Datetime

^||<=

Null OR Less Than or Equal To

Text, Integer, Number, Datetime

^||!=

Null OR NOT Equal

Text, Integer, Number, Datetime

^||like

Null OR SQL Like

Text

^||not like

Null OR SQL NOT Like

Text

^||#=

Null OR Case-Insensitive Equals

Text

^||#!=

Null OR Case-Insensitive NOT Equals

Text

^||#like

Null OR Case-Insensitive SQL Like

Text

^||#not like

Null OR Case-Insensitive SQL NOT Like

Text

Note

Text-Based Expressions

Expressions which contain the SQL Like or SQL NOT Like operators should be used in conjunction with values that contain wildcards (%).

Code Block

customers.city like New% 	// Starts with: i.e. New York, New Orleans
customers.city like %Villa% 	// Contains: i.e. Villa Nova, La Villa Linda
customers.city like %s      	// Ends with: i.e. Athens, Los Angeles

...

Join Type

...

A relation can specify one of two SQL Join Types. A SQL join used when a find or a sort is performed using related criteria and thus, the join type will affect behavior in these situations.

Inner Join

SQL Inner Join does not return any rows for parent records which have no related records. Therefore, if a sort or a find is performed when a related data provider is used for criterion, the related foundset may have records omitted due parents with no child records.

Left Outer Join

SQL Left Outer Join will return always return a row for the parent record even if there are no related records. Therefore, if a sort or a find is performed when a related data provider is used for a criterion, the related foundset will include all matching records, regardless of the presence of related records.

Example: Assume that the user chooses to sort a customer list containing 50 records. The sort is based on the account manager's last name, which is in the employees table. However, 3 of the customers don't have an employee listed to manage the account.

Code Block

foundset.sort('customers_to_employees.last_name asc');
foundset.getSize(); //	returns 50 if the customers_to_employees relation specifies left outer join, 47 if the relation specifies inner join.

...

Initial Sort

...

Calculations

A Calculation is very much like a database column, except that its value, rather than being stored, is dynamically computed each time it is requested.

See Calculations for more information on how to work with calculations.

Aggregations

An aggregation is a data provider which represents a database column that is aggregated over a set of records.

See Aggregations for more information on the properties of an aggregation and how to use it in Servoy.

Variables

Variables are Data Providers which, unlike columns, calculations aggregations do not bind to any persistent, back-end data source. Instead, variables store data in-memory for the duration of the client session only. However, variables may bind to UI components the same as any other data provider.

Data Types

While variables can actually contain any JavaScript object or literal value, they must initially belong to one of the following data types:

  • Text
  • Integer
  • Numeric
  • Data/Time
  • Media
Note

Notice that these are the same as the generalized data types for column-based Data Providers. 

Scope

Variables can belong to one of two scopes:

  • Global
  • Form

Other than programming scope, the only difference between the two is that globals can be used as keys in relations.

Relations

Relations, at design-time model associations between two tables by joining on key data providers. At runtime, a relation becomes a context-sensitive programming reference to related data. Thus, relations are simple, but powerful mechanisms to display, edit and search for data from any context. They can be used, not only to model simple database relations, but also to create sophisticated filters and searches.

Design-Time Properties of Relations

Relations have several design-time properties that dictate how related foundsets will behave at runtime.

Source Table 

Can be any database table or view from any named server connection.

At runtime, a related foundset will exist in the context of a single record from the source table. For example, the relation customer_to_orders, will become available in the context of any record in a foundset which is based on the customers table.

Destination Table

Can be any database table or view from any named server connection and is not limited to the same database as the destination table.

At runtime, a related foundset will contain records from the destination table

Note

The destination table can exist in a separate database from the source table. This is a powerful feature, but it is worth noting that a related foundset, who's relation is defined across two databases will not be available when the source foundset is in find mode. This is because a related find requires a SQL JOIN, which cannot be issued across databases for all vendors.

Relation Items

The nature of the relation between the source and destination tables is defined by one or more Relation Items. Relation Items are expressions, each consisting of a pair of key data providers (one from each table) and a single operator.

Source Data Provider

Operator

Destination Data Provider

The Relation Items will be used to constrain the records that are loaded in the related foundset, such that records are loaded only when all of the expressions evaluate to be true.

Example: This example creates a relation between the customers and the orders table. A related foundset will only load orders records with a customerid equal to the customerid in the context of the source customer record.

Source (customers table)

Operator

Destination (orders table)

customerid

=

customerid

Data Providers

One data provider from each table will serve as an operand in the key-pair expression. Therefore, both data providers must share the same data type. Columns, calculations and global variables may all be used as the source data provider. However, only columns may be used for the destination data provider.

Source Data Provider - Available Types

  • Columns
  • Calculations
  • Global Variables

Destination Data Provider - Available Types

  • Columns Only
Note

Related foundsets are loaded in the context of a single source table record, which is already known. Therefore, any global variables, as well as the source record's calculations can be evaluated and used as a key. However, only columns from the destination table can be used as the dynamic data providers cannot be evaluated on behalf of destination records before they are loaded.

Operators

Each key pair expression is evaluated using a single operator. Certain operators are only applicable to certain data types. Below is a list of all available operators and the data types for which they are applicable.

Operator

Description

Data Types

=

Equals

Text, Integer, Number, Datetime

>

Greater Than

Text, Integer, Number, Datetime

<

Less Than

Text, Integer, Number, Datetime

>=

Greater Than or Equal To

Text, Integer, Number, Datetime

<=

Less Than or Equal To

Text, Integer, Number, Datetime

!=

NOT Equal To

Text, Integer, Number, Datetime

like

SQL Like use with '%' wildcards

Text

not like

SQL Not Like use with '%' wildcards

Text

#=

Case-Insensitive Equals

Text

#!=

Case-Insensitive NOT Equal To

Text

#like

Case-Insensitive SQL Like

Text

#not like

Case-Insensitive SQL NOT Like

Text

^||=

Null OR Equals

Text, Integer, Number, Datetime

^||>

Null OR Greater Than

Text, Integer, Number, Datetime

^||<

Null OR Less Than

Text, Integer, Number, Datetime

^||>=

Null OR Greater Than or Equal To

Text, Integer, Number, Datetime

^||<=

Null OR Less Than or Equal To

Text, Integer, Number, Datetime

^||!=

Null OR NOT Equal

Text, Integer, Number, Datetime

^||like

Null OR SQL Like

Text

^||not like

Null OR SQL NOT Like

Text

^||#=

Null OR Case-Insensitive Equals

Text

^||#!=

Null OR Case-Insensitive NOT Equals

Text

^||#like

Null OR Case-Insensitive SQL Like

Text

^||#not like

Null OR Case-Insensitive SQL NOT Like

Text

Note

Text-Based Expressions

Expressions which contain the SQL Like or SQL NOT Like operators should be used in conjunction with values that contain wildcards (%).

Code Block
customers.city like New% 	// Starts with: i.e. New York, New Orleans
customers.city like %Villa% 	// Contains: i.e. Villa Nova, La Villa Linda
customers.city like %s      	// Ends with: i.e. Athens, Los Angeles

Join Type

A relation can specify one of two SQL Join Types. A SQL join used when a find or a sort is performed using related criteria and thus, the join type will affect behavior in these situations.

Inner Join

SQL Inner Join does not return any rows for parent records which have no related records. Therefore, if a sort or a find is performed when a related data provider is used for criterion, the related foundset may have records omitted due parents with no child records.

Left Outer Join

SQL Left Outer Join will return always return a row for the parent record even if there are no related records. Therefore, if a sort or a find is performed when a related data provider is used for a criterion, the related foundset will include all matching records, regardless of the presence of related records.

Example: Assume that the user chooses to sort a customer list containing 50 records. The sort is based on the account manager's last name, which is in the employees table. However, 3 of the customers don't have an employee listed to manage the account.

Code Block
foundset.sort('customers_to_employees.last_name asc');
foundset.getSize(); //	returns 50 if the customers_to_employees relation specifies left outer join, 47 if the relation specifies inner join.

Initial Sort

Foundsets, including related foundsets, have a sort property. By default, any foundset is sorted by the primary key(s) of the table upon which it is based. Relations have an Initial Sort property, which overrides the default sort, such that any related foundset is initialized to use the sorting definition defined by the relation object. For more information see foundset sorting.

Deprecated

A relation can be deprecated, and a description has to be provided to hint users about what the alternative is.

Encapsulation

A relation has encapsulation property, similar to the form encapsulation property.

  • Public – accessible from everywhere
  • Hide in Scripting; Module Scope – code completion is disabled for the relation, and it is accessible only from the module that it was created in
  • Module Scope – accessible from the module it was created in
Note

For non-public encapsulation, if the relation is accessed from somewhere else, you get a build marker in Problems View, but it will still function properly.

Referential Integrity Constraints

Relations have three options that support referential integrity in the data model. These options control both the actions that are permissible, as well as cascading actions in the data model.

...

Example: Assume a relation, customers_to_orders defined by a single key expression, customers.customerid = orders.customerid

Code Block

customerid;			// 123, the customer's id
customers_to_orders.newRecord();// create the new record
customers_to_orders.customerid;	// 123, the order record's foreign key is auto-filled

...

This option is enabled by default. When disabled, it will prevent the deleting of a record from the source table if the related foundset contains one or more records. If the delete fails, a ServoyException  is is raised with the error code, NO_PARENT_DELETE_WITH_RELATED_RECORDS.

...

Example: Assume the relation customers_to_orders has enabled this option. The deleting of the customer record will cause all related order records to be deleted.

Special Relations

Dynamic Relation

In addition to database columns, calculations and global variables may be used as keys for the source table. This provides a means to implement dynamic data filters without writing any code or SQL. A related foundset is refreshed whenever the value of a source key changes. Thus, by using variables and calculations as keys, developers can articulate nuanced views of data that are contextual not only to the source record, but also the changing state of the application.

...

Source

Operator

Destination

customerid

=

customerid

globals.orderFilterStart

<=

orderdate

globals.orderFilterEnd

>=

orderdate

By simply changing the value of the global variables (either programmatically or through the GUI), the related foundset for a customer's orders is updated instantly.

Global Relation

Global relations are simply relations that use only global variables for source data providers. The key difference between global relations and regular table relations is that the related foundset exists in a global context, having no source record as a context. The obvious benefit is that the globally related foundset will be available ubiquitously, instead of being limited to the context of records based on a source table.

Example: Assume that a customer service rep should have a dashboard of all of their orders that are due today. This view could be accomplished using a global relation on the orders table, which could be used anywhere in the application, such as a form in tabpanel to show a dashboard view.

Source

Operator

Destination

globals.currentUserID

=

sales_rep_id

globals.today

=

orderdate

Self Relation

Relations may have the same source and destination table. This is called a Self Relation and has a variety of applications, such as showing data which is hierarchical in nature, or simply showing other records in the same table, which have similar attributes.

Example: When looking at a particular order record, the user may like to see a portal containing a list of all of the other orders made by the same customer as the current order. This could be expressed using a Self Relation, orders_to_orders_by_customer, containing two relation items. The first specifies the same customer, the next ensures that the current order is omitted from the foundset.

Source

Operator

Destination

customerid

=

customerid

orderid

!=

orderid

...

Source

Operator

Destination

employee_id

=

manager_id

Container Relation

Container relations are a type of Self Relation used to reference the source record's foundset. To create a container relation, the following must be true:

...

Note

If the child forms are not shown through a relation, the approach may still work in many cases, because unrelated forms of the same table will share a single foundset. This is discussed in more detail in the section covering foundsets.

Value Lists

A Value List is a powerful data modeling feature which, at design-time models a particular list of values, which may be static, or dynamic, data-driven lists. Value lists may be bound to UI components, as well as interacted with programmatically. At run-time, a value list returns a list of dynamically generated values for the context of a form/foundset. When bound to a UI component, a value list is displayed as a list of choices, i.e. in a combobox or radio button group, etc. Value lists obviate the need to write code and SQL, thus greatly enhancing developer productivity.

...

Stored Value The value that is returned into a data provider to which the value list is bound.

Types of Value Lists

When creating a Value List, a developer will specify one of four types of value lists, each having different properties and applications.

Custom Values

This is the simplest type of value list. It represents a static list of available values, both displayed and stored. A developer hand-enters values directly into the value list editor. The displayed and stored values may be literal, or evaluated at runtime using i18n keys and global variables.

...

i18n:orderStatusNew|%%globals.ORDER_STATUS_NEW%%

i18n:orderStatusConfirmed|%%globals.ORDER_STATUS_CONFIRMED%%

i18n:orderStatusShipped|%%globals.ORDER_STATUS_SHIPPED%%

Global Method Values

A value list can be bound to a global method which supplies the values every time the value lists is used. This option gives the developer the most control, but also requires that the developer write code, and is therefore recommended to be used when the other value list types are not sufficient. The method is invoked often, each time the value list is referenced and each time the context changes.

Parameters

String displayValue - The value entered by the user into the field bound to the value list. This value will be null, unless the user is typing into the field, in which case the method may be called often as the user types. This parameter is useful when used in combination with Type Ahead fields, allowing the developer to filter the values as the user types.

Object realValue - The real value that is stored in a data provider that is bound to the field for which the value list is invoked. This value is passed in to allow developers to provide display values for a given real value which may not already be in the list.

JSRecord record - The record which is the context for the value list.

String valueListName - The name of the value list for which values will be supplied as multiple value lists could use the same method to obtain their values.

...

JSDataSet containing the values, both displayed and stored. The dataset should have two columns, display and stored respectively. If the dataset has only one column, then it will be used for both displaying and storing values.

Table Values

A value list can be derived from all of the values in a single table. This approach is ideal to use a real table from which to look up values. The following properties apply to Table-based value lists:

...

Note

It is not common to use the Value List Name as Filter setting, unless a reusable, generic table is used to hold many display/values for different value lists.

Related Values

Related value lists are similar to table-based value lists The only difference is that the table which is used is filtered by the characteristics of a relation. Moreover, the relation itself will be contextual to the form/foundset for which the value list is invoked.

...

Example In the above example, a simple one-to-many relation projects_to_people was used. Suppose however that there is a many-to-many relation between projects and people expressed by a link table project_people. The value list could traverse across two relations to return the correct values: projects_to_project_people.project_people_to_people. The far right-hand table, people, is still used to return values in context of a single project record.

Design-Time Properties of Value Lists

There are several design-time settings available for every value list

Fallback Value List

This property specifies another value list which may be used in the event that a record's value does not fall within the set of values provided by the value list

...

. Fallback value lists are useful in find mode.

Example Using the above example for the project_people value list, which shows a list of people related to a project; Imagine that a person was removed from a project, however, the value stored in a related records may still point to that person. In this case, the value would no longer show up in a bound component (i.e. combo box, radio buttons, etc.) as the person is no longer a valid selection. Nevertheless, the person is still referenced by the record. Therefore it may be advantageous to use a fallback value list, say one that displays all people in the people table, to ensure that the person is displayed. However, when the record is edited, only the values in the project_people value list will be displayed.

...

Allow Empty Value

...

This is a simple setting to indicate if a value list will have an empty/ null value available for selection.

...

Sorting Definition

...

The values contained in a table-based, or relation-based value list can be sorted on any columns in the table. Additionally, any related columns may be used as well, only the values in the project_people value list will be displayed.

Allow Empty Value

This is a simple setting to indicate if a value list will have an empty/ null value available for selection.

Sorting Definition

The values contained in a table-based, or relation-based value list can be sorted on any columns in the table. Additionally, any related columns may be used as well.

Deprecated

A value list can be deprecated, and a description has to be provided to hint users about what the alternative is.

Encapsulation

A value list has encapsulation property, similar to the form encapsulation property.

  • Public – accessible from everywhere
  • Module Scope – accessible from the module it was created in
Note

For non-public encapsulation, if the value list is accessed from somewhere else, you get a build marker in Problems View, but it will still function properly.