One Terracotta instance needs to act as Terracotta Server in the cluster. This can be a Terracotta instance on the same machine as one of the Servoy Application Servers in the Servoy Cluster or it can be a Terracotta instance on a dedicated machine.

The Terracotta integration bundled in the Servoy Application Server installation contains a script/batch file to start a Terracotta instance as a server. Before use, the file needs to be edited to point to the location where the Terracotta instance is installed:

The hostname/IP address of the machine running the Terracotta Server is required in the following installation steps.

When a dedicated machine is used to run the Terracotta instance that will act as server, copy the above mentioned file as well as tc-config.xml from the machine where the Servoy Application Server is installed to a directory on the dedicated machine for the Terracotta server instance. Do replace the text "[path_to_terracotta_install]" in terracotta_server.bat/start_terracotta_server.sh accordingly.

When using a Terracotta instance on a machine that also runs one of the Servoy Application Servers, make sure that the machine either gets less load on the Servoy Application Server by using a Load Balancer, or make sure that the machine is capable of handling a higher load.