Add a file to the post will try to get the correct mime type from the file name or the first bytes. |
|
Add a file to the post with a given mime type, could also be used to force the default 'application/octet-stream' on it,
because this plugin will try to guess the correect mime type for the given file (based on the name or the bytes)
If you add a single file then this will be a single file post, so not a mutli part. |
|
Add a file to the post will try to get the correct mime type from the file name or the first bytes. |
|
Add a file to the post with a given mime type, could also be used to force the default 'application/octet-stream' on it,
because this plugin will try to guess the correect mime type for the given file (based on the name or the bytes)
If you add a single file then this will be a single file post, so not a mutli part. |
|
Add a file to the post will try to get the correct mime type from the file name or the first bytes. |
|
Add a file to the post with a given mime type, could also be used to force the default 'application/octet-stream' on it,
because this plugin will try to guess the correect mime type for the given file (based on the name or the bytes)
If you add a single file then this will be a single file post, so not a mutli part. |
|
Add a header to the request. |
|
Add a parameter to the post. |
|
Execute the request method asynchronous. |
|
Execute the request method asynchronous using windows authentication. |
|
Execute the request method asynchronous. |
|
Execute the request method asynchronous using windows authentication. |
|
Execute the request method asynchronous. |
|
Execute the request method asynchronous using windows authentication. |
|
Execute the request method. |
|
Execute the request method. |
|
Execute a request method using windows authentication. |
|
Set the body of the request. |
|
Set the body of the request and content mime type. |
|
Set the charset used when posting. |
|
Whatever to use preemptive authentication (sending the credentials in the header, avoiding the server request to
the client - useful when uploading files, as some http servers would cancel the first request from the client, if too big,
as the authentication request to the client was not yet sent) |
|
|
addFile(parameterName, jsFile) |
|
Add a file to the post will try to get the correct mime type from the file name or the first bytes.
If you add a single file then this will be a single file post, so not a mutli part. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample poster.addFile('myFileParamName','manual.doc','c:/temp/manual_01a.doc')
poster.addFile(null,'postXml.xml','c:/temp/postXml.xml') // sets the xml to post
var f = plugins.file.convertToJSFile('./somefile02.txt')
if (f && f.exists()) poster.addFile('myTxtFileParamName','somefile.txt', f)
f = plugins.file.convertToJSFile('./anotherfile_v2b.txt')
if (f && f.exists()) poster.addFile('myOtherTxtFileParamName', f) |
|
|
|
|
addFile(parameterName, jsFile, mimeType) |
|
Add a file to the post with a given mime type, could also be used to force the default 'application/octet-stream' on it,
because this plugin will try to guess the correect mime type for the given file (based on the name or the bytes)
If you add a single file then this will be a single file post, so not a mutli part. |
|
|
Parameters The mime type that must be used could be the real default ('application/octet-stream') if the files one (by name or by its first bytes) is not good. |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample poster.addFile('myFileParamName','manual.doc','c:/temp/manual_01a.doc', 'application/msword')
poster.addFile(null,'postXml.xml','c:/temp/postXml.xml', 'text/xml') // sets the xml to post
var f = plugins.file.convertToJSFile('./somefile02.txt')
if (f && f.exists()) poster.addFile('myTxtFileParamName','somefile.txt', f, 'text/plain')
f = plugins.file.convertToJSFile('./anotherfile_v2b.txt')
if (f && f.exists()) poster.addFile('myOtherTxtFileParamName', f, 'text/plain') |
|
|
|
|
addFile(parameterName, fileName, jsFile) |
|
Add a file to the post will try to get the correct mime type from the file name or the first bytes.
If you add a single file then this will be a single file post, so not a mutli part. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample poster.addFile('myFileParamName','manual.doc','c:/temp/manual_01a.doc')
poster.addFile(null,'postXml.xml','c:/temp/postXml.xml') // sets the xml to post
var f = plugins.file.convertToJSFile('./somefile02.txt')
if (f && f.exists()) poster.addFile('myTxtFileParamName','somefile.txt', f)
f = plugins.file.convertToJSFile('./anotherfile_v2b.txt')
if (f && f.exists()) poster.addFile('myOtherTxtFileParamName', f) |
|
|
|
|
addFile(parameterName, fileName, jsFile, mimeType) |
|
Add a file to the post with a given mime type, could also be used to force the default 'application/octet-stream' on it,
because this plugin will try to guess the correect mime type for the given file (based on the name or the bytes)
If you add a single file then this will be a single file post, so not a mutli part. |
|
|
Parameters The mime type that must be used could be the real default ('application/octet-stream') if the files one (by name or by its first bytes) is not good. |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample poster.addFile('myFileParamName','manual.doc','c:/temp/manual_01a.doc', 'application/msword')
poster.addFile(null,'postXml.xml','c:/temp/postXml.xml', 'text/xml') // sets the xml to post
var f = plugins.file.convertToJSFile('./somefile02.txt')
if (f && f.exists()) poster.addFile('myTxtFileParamName','somefile.txt', f, 'text/plain')
f = plugins.file.convertToJSFile('./anotherfile_v2b.txt')
if (f && f.exists()) poster.addFile('myOtherTxtFileParamName', f, 'text/plain') |
|
|
|
|
addFile(parameterName, fileName, fileLocation) |
|
Add a file to the post will try to get the correct mime type from the file name or the first bytes.
If you add a single file then this will be a single file post, so not a mutli part. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample poster.addFile('myFileParamName','manual.doc','c:/temp/manual_01a.doc')
poster.addFile(null,'postXml.xml','c:/temp/postXml.xml') // sets the xml to post
var f = plugins.file.convertToJSFile('./somefile02.txt')
if (f && f.exists()) poster.addFile('myTxtFileParamName','somefile.txt', f)
f = plugins.file.convertToJSFile('./anotherfile_v2b.txt')
if (f && f.exists()) poster.addFile('myOtherTxtFileParamName', f) |
|
|
|
|
addFile(parameterName, fileName, fileLocation, mimeType) |
|
Add a file to the post with a given mime type, could also be used to force the default 'application/octet-stream' on it,
because this plugin will try to guess the correect mime type for the given file (based on the name or the bytes)
If you add a single file then this will be a single file post, so not a mutli part. |
|
|
Parameters The mime type that must be used could be the real default ('application/octet-stream') if the files one (by name or by its first bytes) is not good. |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample poster.addFile('myFileParamName','manual.doc','c:/temp/manual_01a.doc', 'application/msword')
poster.addFile(null,'postXml.xml','c:/temp/postXml.xml', 'text/xml') // sets the xml to post
var f = plugins.file.convertToJSFile('./somefile02.txt')
if (f && f.exists()) poster.addFile('myTxtFileParamName','somefile.txt', f, 'text/plain')
f = plugins.file.convertToJSFile('./anotherfile_v2b.txt')
if (f && f.exists()) poster.addFile('myOtherTxtFileParamName', f, 'text/plain') |
|
|
|
|
addHeader(headerName, value) |
|
Add a header to the request. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.addHeader('Content-type','text/xml; charset=ISO-8859-1') |
|
|
|
|
addParameter(name, value) |
|
Add a parameter to the post. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample poster.addParameter('name','value')
poster.addParameter(null,'value') //sets the content to post |
|
|
|
|
executeAsyncRequest(username, password, workstation, domain, successCallbackMethod, errorCallbackMethod) |
|
Execute the request method asynchronous. Success callback method will be called when response is received.
Response is sent as parameter in callback.
This Response can be a response with a different status code then just 200, it could also be 500, which is still a valid response from the server, this won't go into the error callback.
So you need to test the Reponse.getStatusCode() for that to know if everything did go OK.
If no response is received (request errors out), the errorCallbackMethod is called with exception message as parameter. |
|
|
Parameters The workstation the authentication request is originating from. |
|
The domain to authenticate within. |
|
callbackMethod to be called after response is received |
|
callbackMethod to be called if request errors out |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.executeAsyncRequest('username','password','mycomputername','domain',globals.successCallback,globals.errorCallback) |
|
|
|
|
executeAsyncRequest(username, password, workstation, domain, successCallbackMethod, errorCallbackMethod, callbackExtraArgs) |
|
Execute the request method asynchronous using windows authentication.
Success callback method will be called when response is received. Response is sent as parameter in callback followed by any 'callbackExtraArgs' that were given.
This Response can be a response with a different status code then just 200, it could also be 500, which is still a valid response from the server, this won't go into the error callback.
So you need to test the Reponse.getStatusCode() for that to know if everything did go OK.
If no response is received (request errors out, network errors), the errorCallbackMethod is called with exception message as parameter followed by any 'callbackExtraArgs' that were given. |
|
|
Parameters The workstation the authentication request is originating from. |
|
The domain to authenticate within. |
|
callbackMethod to be called after response is received |
|
callbackMethod to be called if request errors out |
|
extra arguments that will be passed to the callback methods; can be used to identify from which request the response arrived when
using the same callback method for multiple requests. Please use only simple JSON arguments (primitive types or array/objects of primitive types) |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.executeAsyncRequest('username','password','mycomputername','domain',globals.successCallback,globals.errorCallback, [callIDInt]) |
|
|
|
|
executeAsyncRequest(username, password, successCallbackMethod, errorCallbackMethod) |
|
Execute the request method asynchronous. Success callback method will be called when response is received.
Response is sent as parameter in callback.
This Response can be a response with a different status code then just 200, it could also be 500, which is still a valid response from the server, this won't go into the error callback.
So you need to test the Reponse.getStatusCode() for that to know if everything did go OK.
If no response is received (request errors out), the errorCallbackMethod is called with exception message as parameter. |
|
|
Parameters callbackMethod to be called after response is received |
|
callbackMethod to be called if request errors out |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.executeAsyncRequest(globals.successCallback,globals.errorCallback) |
|
|
|
|
executeAsyncRequest(username, password, successCallbackMethod, errorCallbackMethod, callbackExtraArgs) |
|
Execute the request method asynchronous using windows authentication.
Success callback method will be called when response is received. Response is sent as parameter in callback followed by any 'callbackExtraArgs' that were given.
This Response can be a response with a different status code then just 200, it could also be 500, which is still a valid response from the server, this won't go into the error callback.
So you need to test the Reponse.getStatusCode() for that to know if everything did go OK.
If no response is received (request errors out, network errors), the errorCallbackMethod is called with exception message as parameter followed by any 'callbackExtraArgs' that were given. |
|
|
Parameters callbackMethod to be called after response is received |
|
callbackMethod to be called if request errors out |
|
extra arguments that will be passed to the callback methods; can be used to identify from which request the response arrived when
using the same callback method for multiple requests. Please use only simple JSON arguments (primitive types or array/objects of primitive types) |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.executeAsyncRequest(globals.successCallback,globals.errorCallback, [callIDInt]) |
|
|
|
|
executeAsyncRequest(successCallbackMethod, errorCallbackMethod) |
|
Execute the request method asynchronous. Success callback method will be called when response is received.
Response is sent as parameter in callback.
This Response can be a response with a different status code then just 200, it could also be 500, which is still a valid response from the server, this won't go into the error callback.
So you need to test the Reponse.getStatusCode() for that to know if everything did go OK.
If no response is received (request errors out), the errorCallbackMethod is called with exception message as parameter. |
|
|
Parameters callbackMethod to be called after response is received |
|
callbackMethod to be called if request errors out |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.executeAsyncRequest(globals.successCallback,globals.errorCallback) |
|
|
|
|
executeAsyncRequest(successCallbackMethod, errorCallbackMethod, callbackExtraArgs) |
|
Execute the request method asynchronous using windows authentication.
Success callback method will be called when response is received. Response is sent as parameter in callback followed by any 'callbackExtraArgs' that were given.
This Response can be a response with a different status code then just 200, it could also be 500, which is still a valid response from the server, this won't go into the error callback.
So you need to test the Reponse.getStatusCode() for that to know if everything did go OK.
If no response is received (request errors out, network errors), the errorCallbackMethod is called with exception message as parameter followed by any 'callbackExtraArgs' that were given. |
|
|
Parameters callbackMethod to be called after response is received |
|
callbackMethod to be called if request errors out |
|
extra arguments that will be passed to the callback methods; can be used to identify from which request the response arrived when
using the same callback method for multiple requests. Please use only simple JSON arguments (primitive types or array/objects of primitive types) |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.executeAsyncRequest(globals.successCallback,globals.errorCallback, [callIDInt]) |
|
|
|
|
Execute the request method. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample var response = method.executeRequest()
To be able to reuse the client, the response must be
closed if the content is not read via getResponseBody
or getMediaData:
response.close() |
|
|
|
|
executeRequest(userName, password) |
|
Execute the request method. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample var response = method.executeRequest()
To be able to reuse the client, the response must be
closed if the content is not read via getResponseBody
or getMediaData:
response.close() |
|
|
|
|
executeRequest(userName, password, workstation, domain) |
|
Execute a request method using windows authentication. |
|
|
Parameters The workstation the authentication request is originating from. |
|
The domain to authenticate within. |
|
|
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample var response = method.executeRequest('username','password','mycomputername','domain'); |
|
|
|
|
Set the body of the request. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.setBodyContent(content) |
|
|
|
|
setBodyContent(content, mimeType) |
|
Set the body of the request and content mime type. |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample method.setBodyContent(content, 'text/xml') |
|
|
|
|
Set the charset used when posting. If this is null or not called it will use the default charset (UTF-8). |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
Sample var client = plugins.http.createNewHttpClient();
var poster = client.createPostRequest('https://twitter.com/statuses/update.json');
poster.addParameter('status',scopes.globals.textToPost);
poster.addParameter('source','Test Source');
poster.setCharset('UTF-8');
var httpCode = poster.executeRequest(scopes.globals.twitterUserName, scopes.globals.twitterPassword).getStatusCode() // httpCode 200 is ok |
|
|
|
|
usePreemptiveAuthentication(b) |
|
Whatever to use preemptive authentication (sending the credentials in the header, avoiding the server request to
the client - useful when uploading files, as some http servers would cancel the first request from the client, if too big,
as the authentication request to the client was not yet sent) |
|
|
Supported Clients SmartClient,WebClient,NGClient |
|
|
|
|
|